ASR1001-X Overview
Cisco ASR 1000-X is designed for high-end enterprise, data center, service provider edging network in order to handle explosive traffic through the network. It supports only software redundancy, and it is based on a Quad-core 2.13GHz processor with 4GB memory, 8GB flash memory, 1 SPA bay, SPA interface processor 10 (SIP10).
This ASR1001-X is similar with the ASR1001-X=. The ASR1001-X= is a spare one.
Quick Specs.
|
Product Code |
Cisco ASR 1001-X |
|
Rack Height |
1RU |
|
System Bandwidth |
2.5G (default) / 5G, 10G, 20G (upgrade) |
|
Router Processor (RP) |
Quad-core 2.13Ghz processor |
|
Build-in Gigabit Ethernet port |
6 x SFP ports, 2 x SFP+ ports |
|
Redundancy |
Software (license purchase separately) |
|
SIP and Ethernet line card |
Integrated in chassis; not upgradable |
|
Embedded hardware-based encryption |
up to 8-Gbps crypto support throughput |
|
Rack-mounting |
19-inch |
|
DRAM Memory |
8 GB |
|
Flash Memory |
8 GB |
|
Shared port adapters |
1 SPA slot |
|
External USB flash memory |
1-GB USB flash-memory support |
Product Details
Note:
1. NIM slots
2. CON—One mini eUSB por
3. STAT—Status LED
4. CRIT LED—Critical alarm indicator; MAJ LED—Major alarm indicator; MIN LED—Minor alarm indicator
5. 6 x SFP ports, 2 x SFP+ ports
6. CON—One RJ-45/RS-232 compatible console port
7. USB port 1
8. USB port 0
9. Shared port adapter slot
10. MGMT—One RJ-45 10/100/1000 management Ethernet port.
11. AUX—One RJ-45/RS-232 compatible auxiliary port
12. PWR—Power LED
·Six built-in 1 GE SFP-only interfaces (do not support SFP+), and two built-in 10 GE SFP+ interfaces (support only 10-GE rate)
LEDs’ Descriptions.
|
LEDs |
Color |
Description |
|
PWR (Power) |
Solid green |
All power requirements are within specification. |
|
Off |
The router is in standby mode. |
|
|
STAT (System Status) |
Solid green |
Cisco IOSD and other required processes have loaded successfully and are operating. |
|
Yellow |
ROMMON is running (including a permanent failure of RP software) or the Process Manager has declared a critical RP process (including IOSD) dead. A user can log in to recover. |
|
|
Red |
Occurs during system failure or power-up. |
|
|
CRIT (Critical) |
Solid Red |
Functions as a critical alarm indicator. The LED is lso a solid red during the boot process. |
|
MAJ (Major) |
Solid Red |
Major alarm indicator. |
|
MIN (Minor) |
Amber |
Minor alarm indicator. |
Note：
1. Two power supplies, either two AC power supplies or two DC power supplies are accessed from the rear of the router and are hot-swappable.
2. Four internal fans draw cooling air into the chassis and across internal components to maintain an acceptable operating temperature.
The Configuration
The ASR1001-X should be configured with some modules and accessories for normal operation.
ASR1001-X Specifications |
|
|
Physical specifications Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets. Refer to the applicable hardware installation guide for additional details. |
Height: 1.71 in. (43.43 mm) Width: 17.3 in. (439.42 mm) Depth: 18.17 in. (461.5 mm) Weight: ● 25 lb (11.35 kg) fully loaded Note: The Cisco ASR 1001-X Router has the route processor, ESP, and SIP integrated. |
|
Default memory |
8-GB DRAM shared across route processor, ESP, and SIP |
|
Number of SIPs or Ethernet line cards supported |
Integrated in chassis |
|
Shared port adapters |
1 single-height SPA slot |
|
Ethernet port adapters |
N/A |
|
Cisco ASR 1000 Series ESP |
Integrated in chassis |
|
Route processor |
Integrated in the chassis: Cisco ASR 1001-X Series Route Processor with Quad Core Processor |
|
Redundancy |
Software: Yes |
|
Built-in Gigabit Ethernet ports |
Yes: 6 Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports |
|
Built-in 10 Gigabit Ethernet port |
Yes: Two 10 Gigabit Ethernet Small Form-Factor Plus Pluggable (SFP+) ports Note:Built-in 10-GB ports cannot be reduced to 1-GB speed. |
|
Network interface module |
Yes |
|
Cisco ASR 1000 Series |
Cisco ASR 1001-X |
|
ESP support |
Cisco ASR 1000 Series 2.5-Gbps ESP (default) Upgradable through a software-activated feature license to 5, 10, or 20 Gbps |
|
ESP bandwidth |
2.5 to 20 Gbps |
|
ESP memory |
Share the same control memory on route processor |
|
SIPs and Ethernet line cards |
Integrated in chassis; not upgradable |
|
Embedded hardware-based encryption |
Yes: Up to 8-Gbps crypto support throughput |
|
Minimum Cisco IOS XE Software release |
Cisco IOS XE Software Release 3.12.0 |
|
Rack-mounting |
Yes: 19-inch |
|
Wall-mounting |
No |
|
External USB flash memory |
1-GB USB flash-memory support |
|
Redundant power supply |
Yes: Dual power supplies by default; option of either AC or DC power supply Note: A mix of one AC and one DC power supply is not supported. |
|
Power input |
Worldwide ranging AC input range (85 to 264 VAC) Worldwide ranging DC (-40 to -72V; 48V nominal) |
|
Power consumption |
● Maximum (DC): 242W ● Maximum (AC): 250W ● Maximum (out): 250W |
|
Airflow |
Front-to-back |
|
Operating temperature (nominal) |
32 to 104°F |
|
Operating temperature (short-term) |
32 to 122°F |
|
Operating humidity (nominal) (relative humidity) |
10 to 85% |
|
Operating humidity (short-term) |
5 to 90% |
|
Storage temperature |
-40 to 150°F (-40 to 70°C) |
|
Storage humidity (relative humidity) |
5 to 95% |
|
Operating altitude |
-500 to 10,000 feet |
|
Network Equipment Building Standards (NEBS) |
GR-1089 and GR-63 (in progress) |
|
EMC standards |
● FCC 47 CFR Part 15 Class A ● VCCI Class A ● AS/NSZ Class A ● ICES-003 Class A ● EN55022/CISPR 22 Information Technology Equipment (Emissions) ● EN55024/CISPR 24 Information Technology Equipment (Immunity) ● EN300 386 Telecommunications Network Equipment ● (EMC) ● EN50082-1/EN61000-6-1 Generic Immunity Standard |
|
Safety Standard |
UL60950-1 CSA C22.2 No. 60950-1-03 EN 60950-1 IEC 60950-1 AS/NZS 60950.1 |
We will endeavour to process and ship your orders within 2 to 3 days of receiving your order. If the order is within Lusaka it can take between 1-2 working days to receive the order from the date since it has been ordered.
Free shipping and delivery can be within Lusaka if the value is above ZMK 1000. For all orders below ZMK 1000, a minimal charge will be applied per order. Delivery to Out of Service Areas will incur extra charges as per the location from the shop. The recipient of an international shipment may be subjected to pay Customs Duties or fees as levied by the destination country. We have no control over these charges and are unable to calculate what they may be. International shipping times vary by carrier & destination (7-15 working days)
Exchange or Return is possible only if the product is not damaged or the packaging is not broken
No Exchange or Return shall be made without the Original Invoice provided and the product (including the unit carton) is returned unused and unopened (original seal not broken) along with accessories & FOC (Free of Cost) items, if applicable.
No Exchange or Return shall be made for the following product categories: Software
To look into your return or exchange, we require a receipt or proof of purchase. For returns, it is the customer’s responsibility to deliver the item back to Anfio.
For the customer’s convenience, Anfio may be able to provide an option for collection via courier at a nominal rate.
Once your return is received and inspected, we will send you an email or a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, Money will be sent to you via cash or a bank transfer, within a certain amount of days.
Selected products as “On request“ or “On Order“ items are not possible to be returned.
Shipping costs on returned products would be your responsibility. Shipping costs charged upon your purchase are non-refundable. Ensuring that it’s not our responsibility, if at all Namo Computers is necessitated for paying shipping charges upon any return product/shipment then such charges will be deducted from the subjected refund amount.
These terms & conditions shall be governed and constructed in accordance with the laws of the Zambia
REFUNDS (IF APPLICABLE)
Once your return is received and inspected, we will send you an email or give you a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed Money will be given to you via cash or bank transfer, within a certain amount of days
