MikroTiks 100 Gigabit family keeps expanding – you’ve already seen the incredible CCR2216 100 Gigabit router. Now it’s time for a matching switch – the CRS504-4XQ-IN. The small size combined with the low power consumption (25W without attachments!) is perfect to start expanding 100 Gigabit networking in everyday setups. This speed is no longer limited to data centers, ISPs, and large offices. You too can upgrade your 10 or 25 Gigabit network and join the one hundred club!
There are four 100 Gigabit QSFP28 ports. Use them to connect other 100 Gigabit devices or grab a breakout cable to connect multiple 25 Gigabit devices: each port is connected to four 25 Gigabit lines, allowing you to connect 16 x 25 Gigabit devices. In fact, you can mix and match all kinds of connections this way: 100 Gigabits on one port, 40 Gigabits on the other, 4x25 Gigabits on the third, and maybe even some 10G or 1G cables on the fourth. The mighty Marvell DX4310 switch-chip will handle everything without breaking a sweat!
Obviously, there is an Ethernet port for management purposes as well.
We’ve been using this switch for quite some time now in the Genomics Data Network project. A high-capacity data network for our local scientists working on ground-breaking cancer treatments. Genome data can take up a lot of space, so you need exceptionally fast connections there. Also, with these devices, Latvia became the first Baltic country to establish a 100 Gigabit connection to the pan-European research network.
With multiple powering options and the ability to be mounted on the wall, this switch will make any system administrator happy.
Technical parameters
Connectors and interfaces
LAN speed: (1) 10/100Mbps
Optical interface: (4) 100G
Serial port: RJ45
Power supply
Power supply via PoE: 802.3af, 802.3at, 43 .. 57V DC
Redundant power supply: Yes
Power supply type: PoE, DC connector, DC terminal block, Mains (230V)
PoE types: PoE-In (only)
Max. power consumption [W]: 25
Power supply via connector/terminal block: 36 .. 57V DC, 230V AC
Physical characteristics
Design: Desktop, Rackmount
Number of "U" positions: 1
Fans: (2) 40 x 40 mm
Chassis: Metal
Buttons: Reset
Operating temperature [° C]: - 40 to 70
Width [mm] 320
Height [mm]: 44
Depth [mm] 185
Hardware
CPU: QCA9531
CPU frequency [MHz]: 650
Number of CPU cores: 1
Internal storage [MB]: 16
RAM [MB]: 64
Software
Web management: Yes
Management: Web interface
Functions: VLAN, QoS, L3
Operating system: RouterOS - L5
IPv6 support: Yes
Default IP address: 192.168.88.1
We will endeavour to process and ship your orders within 2 to 3 days of receiving your order. If the order is within Lusaka it can take between 1-2 working days to receive the order from the date since it has been ordered.
Free shipping and delivery can be within Lusaka if the value is above ZMK 1000. For all orders below ZMK 1000, a minimal charge will be applied per order. Delivery to Out of Service Areas will incur extra charges as per the location from the shop. The recipient of an international shipment may be subjected to pay Customs Duties or fees as levied by the destination country. We have no control over these charges and are unable to calculate what they may be. International shipping times vary by carrier & destination (7-15 working days)
Exchange or Return is possible only if the product is not damaged or the packaging is not broken
No Exchange or Return shall be made without the Original Invoice provided and the product (including the unit carton) is returned unused and unopened (original seal not broken) along with accessories & FOC (Free of Cost) items, if applicable.
No Exchange or Return shall be made for the following product categories: Software
To look into your return or exchange, we require a receipt or proof of purchase. For returns, it is the customer’s responsibility to deliver the item back to Anfio.
For the customer’s convenience, Anfio may be able to provide an option for collection via courier at a nominal rate.
Once your return is received and inspected, we will send you an email or a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, Money will be sent to you via cash or a bank transfer, within a certain amount of days.
Selected products as “On request“ or “On Order“ items are not possible to be returned.
Shipping costs on returned products would be your responsibility. Shipping costs charged upon your purchase are non-refundable. Ensuring that it’s not our responsibility, if at all Namo Computers is necessitated for paying shipping charges upon any return product/shipment then such charges will be deducted from the subjected refund amount.
These terms & conditions shall be governed and constructed in accordance with the laws of the Zambia
REFUNDS (IF APPLICABLE)
Once your return is received and inspected, we will send you an email or give you a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed Money will be given to you via cash or bank transfer, within a certain amount of days
