Seagate 1TB BarraCuda SATA III 3.5" Internal Hard Drive, Up to 210 MB/s Data Transfer Rate, SATA III 6Gb/s, 64 MB Cache Memory, 7200 rpm Spindle Speed, | ST1000DM010

The BarraCuda SATA III 3.5" Internal HDD from Seagate features 1TB storage capacity and comes equipped with 64MB of cache memory and a SATA III interface. The interface is backward compatible with SATA II 3 Gb/s and SATA 1.5 Gb/s equipment. The drive supports a maximum internal data transfer rate of 2147 MB/s and an average rate of 156 MB/s.

 

  • 7200 RPM spindle speed
  • Full-track multiple-sector transfer capability without local processor intervention
  • Hotplug operation per Serial ATA Revision 3.2
  • High instantaneous (burst) data transfer rates of up to 600 MB/s
  • Native Command Queuing with command ordering to increase performance in demanding applications
  • Seagate AcuTrac servo technology for dependable performance, even with hard drive track widths of only 75 nm
  • Seagate OptiCache technology boosts overall performance by as much as 45% over the previous generation
  • Seagate SmartAlign technology provides for migration to Advanced Format 4K sectors
  • SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns
  • On-the-fly error-correction algorithms
  • Support for S.M.A.R.T. drive monitoring and reporting
  • Supports latching SATA cables and connectors
 

 

Specifications

 

Storage Capacity Total: 1 TB SATA III (6 Gb/s) 3.5" HDD (7200 rpm)
Read Speed Sustained: 210 MB/s
Minimum: 156 MB/s
Write Speed Minimum: 156 MB/s
Buffer 64 MB
Pre-Format None
Latency 4.1 ms
Seek Time 8.5 ms (Read)
9.5 ms (Write)
HDD Specs
Heads 2
Platters 1
Areal Density 625 Gb/in²
Noise Level 2.3 dB (Idle)
2.4 dB (Active)
Reliability / Data Integrity
Annualized Failure Rate (AFR) 1 %
Encryption None
Load/Unload Cycles 50,000
Non-Recoverable Read Errors per Bits Read 1 in 1014
Electrical
Supported Voltage 5 VDC, 12 VDC
Current 2.0 A at 12 VDC
Environmental
Operating Temperature 32 to 140°F / 0 to 60°C
Storage Temperature -40 to 158°F / -40 to 70°C
Operating Shock 80 G / 2.0 ms
Storage Shock 350 G / 2.0 ms
Operating Humidity 5 to 95%
Storage Humidity 5 to 95%

We will endeavour to process and ship your orders within 2 to 3 days of receiving your order. If the order is within Lusaka it can take between 1-2 working days to receive the order from the date since it has been ordered.

Free shipping and delivery can be within Lusaka if the value is above ZMK 1000. For all orders below ZMK 1000, a minimal charge will be applied per order. Delivery to Out of Service Areas will incur extra charges as per the location from the shop. The recipient of an international shipment may be subjected to pay Customs Duties or fees as levied by the destination country. We have no control over these charges and are unable to calculate what they may be. International shipping times vary by carrier & destination (7-15 working days)

Exchange or Return is possible only if the product is not damaged or the packaging is not broken

No Exchange or Return shall be made without the Original Invoice provided and the product (including the unit carton) is returned unused and unopened (original seal not broken) along with accessories & FOC (Free of Cost) items, if applicable.

 

 

No Exchange or Return shall be made for the following product categories: Software

 

 

To look into your return or exchange, we require a receipt or proof of purchase. For returns, it is the customer’s responsibility to deliver the item back to Anfio.

 

 

For the customer’s convenience, Anfio may be able to provide an option for collection via courier at a nominal rate.

 

 

Once your return is received and inspected, we will send you an email or a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, Money will be sent to you via cash or a bank transfer, within a certain amount of days.

Selected products as “On request“ or “On Order“ items are not possible to be returned.

 

 

Shipping costs on returned products would be your responsibility. Shipping costs charged upon your purchase are non-refundable. Ensuring that it’s not our responsibility, if at all Namo Computers is necessitated for paying shipping charges upon any return product/shipment then such charges will be deducted from the subjected refund amount.

 

 

These terms & conditions shall be governed and constructed in accordance with the laws of the Zambia 

 

 

REFUNDS (IF APPLICABLE)

Once your return is received and inspected, we will send you an email or give you a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed Money will be given to you via cash or bank transfer, within a certain amount of days