Teltonika TSW101 Auto PoE+ Switch, 5x RJ45 Gigabit Ethernet, Up to 1000 Mbps, 4x PoE+ Ports (802.3af & 802.3at), 9-30V Power, Plug & Play | TSW101
TSW101 is Teltonika Networks’ first automotive-dedicated unmanaged switch. Equipped with five Gigabit Ethernet ports, four of which support IEEE802.3af and IEEE802.3at PoE+ standards. A wide range of supported power supply voltages (9-30 VDC), and a compact size allow it to slot into many automotive applications. Classified as a power source equipment (PSE), this device enables power supply centralization - providing up to 30 watts per single port and maximum output power of 60 watts. 10/100/1000 Mbps Ethernet ports for streamlined, high-bandwidth solutions. Ideal for providing both: in-vehicle power and an Ethernet data connection simultaneously.
AUTOMOTIVE SWITCH
Ideal for in-vehicle solutions
POE+
4 x PoE+ ports with 802.3af and 802.3at support
GIGABIT ETHERNET
5 x Gigabit Ethernet ports with speeds of up to 1000 Mbps
INDUSTRIAL DESIGN
Rugged aluminum housing
LOW INPUT VOLTAGE
9-30 V power range for PoE
PLUG-N-PLAY
No configuration needed
Specification
| INTERFACES | |
| Ethernet | 5 x RJ45 ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
| POE | |
| PoE ports | Port 1- 4 |
| PoE standards | 802.3af and 802.3at |
| PoE Max Power per Port (at PSE) | 30 W |
| Total PoE Power Budget (at PSE) | 60 W |
| Maximum Ethernet cable length | 100 m |
| PERFORMANCE SPECIFICATIONS | |
| Bandwidth (Non-blocking) | 10 Gbps |
| Packet buffer | 128 KB |
| MAC address table size | 2K entries |
| Jumbo frame support | 9216 bytes |
| POWER | |
| Connector | 2-pin industrial DC power socket |
| Input voltage range | 9-30 VDC |
| Input voltage range for PoE | 9-30 VDC |
| Power consumption | Idle: 0.64 W / Max: 2.31 W / PoE Max: 60 W |
| PHYSICAL INTERFACES (PORTS, LEDS) | |
| Ethernet | 5 x RJ45 ports, 10/100/1000 Mbps |
| Status LED’s | 1 x Power LED, 10 x LAN status LED’s |
| Power | 1 x 2-pin industrial DC power socket |
| Ground | 1 x Grounding screw |
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminum housing |
| Dimensions (W x H x D) | 115 x 32 x 95 mm |
| Weight | 354 g |
| Mounting | DIN rail or wall mounting (additional kit needed), flat surface placement |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 °C to +75 °C |
| Operating humidity | 10 % to 90 % non condensing |
| Ingress Protection Rating | IP30 |
| CERTIFICATION & APPROVALS | |
| Regulatory | CE, REACH, RoHS, WEEE |
| TSW101 CE | |
| TSW101 UKCA | |
| TSW101 FCC | |
| TSW101 IC | |
| TSW101 CB | |
| TSW101 RCM | |
| E-Mark | |
We will endeavour to process and ship your orders within 2 to 3 days of receiving your order. If the order is within Lusaka it can take between 1-2 working days to receive the order from the date since it has been ordered.
Free shipping and delivery can be within Lusaka if the value is above ZMK 1000. For all orders below ZMK 1000, a minimal charge will be applied per order. Delivery to Out of Service Areas will incur extra charges as per the location from the shop. The recipient of an international shipment may be subjected to pay Customs Duties or fees as levied by the destination country. We have no control over these charges and are unable to calculate what they may be. International shipping times vary by carrier & destination (7-15 working days)
Exchange or Return is possible only if the product is not damaged or the packaging is not broken
No Exchange or Return shall be made without the Original Invoice provided and the product (including the unit carton) is returned unused and unopened (original seal not broken) along with accessories & FOC (Free of Cost) items, if applicable.
No Exchange or Return shall be made for the following product categories: Software
To look into your return or exchange, we require a receipt or proof of purchase. For returns, it is the customer’s responsibility to deliver the item back to Anfio.
For the customer’s convenience, Anfio may be able to provide an option for collection via courier at a nominal rate.
Once your return is received and inspected, we will send you an email or a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, Money will be sent to you via cash or a bank transfer, within a certain amount of days.
Selected products as “On request“ or “On Order“ items are not possible to be returned.
Shipping costs on returned products would be your responsibility. Shipping costs charged upon your purchase are non-refundable. Ensuring that it’s not our responsibility, if at all Namo Computers is necessitated for paying shipping charges upon any return product/shipment then such charges will be deducted from the subjected refund amount.
These terms & conditions shall be governed and constructed in accordance with the laws of the Zambia
REFUNDS (IF APPLICABLE)
Once your return is received and inspected, we will send you an email or give you a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed Money will be given to you via cash or bank transfer, within a certain amount of days
