Teltonika TSW210 Unmanaged industrial Switch, 8 x Gigabit Ethernet Ports, Rugged Aluminum Housing, Speeds Up to 1000 Mbps, 2 x SFP Ports, 2-Pin Industrial DC, 7-57 V Power, IP30 Protection | TSW210

The TSW210 is an industrial unmanaged switch for centralizing your resources. Equipped with 2 SFP ports for long-range fiberoptic communication and 8 Gigabit Ethernet ports with of up to 1000 Mbps download/upload speed. Durable, rugged aluminum housing with DIN rail and surface mounting options make the TSW210 perfect for industrial settings. 2-pin industrial DC power socket with an input voltage range of 7-57 VDC.

 

7-57 V

Wide range of supported power supply voltages

POWER CONNECTOR

2-pin industrial DC power socket

SFP

2 x SFP ports for long-range fiberoptic communication

DURABILITY

Rugged aluminum housing for industrial settings

MOUNTING

DIN rail and surface mounting options

ETHERNET

8 x Gigabit Ethernet ports with speeds of up to 1000 Mbps

 

Specification

INTERFACES
Ethernet 8 x RJ45 ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
2 x SFP ports
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking) 20 Gbps
Packet buffer 128 KB
MAC address table size 2K entries
Jumbo frame support 9216 bytes
POWER
Connector 2 pin industrial DC power socket
Input voltage range 7-57 VDC
Power consumption Idle: ~1.03 W / Max: 3.71 W
PHYSICAL INTERFACES (PORTS, LEDS)
Ethernet 8 x RJ45 ports, 10/100/1000 Mbps
Fiber 2 x SFP ports
Status LED’s 1 x Power LED, 16 x LAN status LED’s 2 x SFP status LED’s
Power 1 x 2 pin industrial DC power socket
Ground 1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material Full aluminum housing
Dimensions (W x H x D) 132 x 44.2 x 95.1 mm
Weight 500 g
Mounting DIN rail or wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature -40 °C to +75 °C
Operating humidity 10 % to 90 % non condensing
Ingress Protection Rating IP30

We will endeavour to process and ship your orders within 2 to 3 days of receiving your order. If the order is within Lusaka it can take between 1-2 working days to receive the order from the date since it has been ordered.

Free shipping and delivery can be within Lusaka if the value is above ZMK 1000. For all orders below ZMK 1000, a minimal charge will be applied per order. Delivery to Out of Service Areas will incur extra charges as per the location from the shop. The recipient of an international shipment may be subjected to pay Customs Duties or fees as levied by the destination country. We have no control over these charges and are unable to calculate what they may be. International shipping times vary by carrier & destination (7-15 working days)

Exchange or Return is possible only if the product is not damaged or the packaging is not broken

No Exchange or Return shall be made without the Original Invoice provided and the product (including the unit carton) is returned unused and unopened (original seal not broken) along with accessories & FOC (Free of Cost) items, if applicable.

 

 

No Exchange or Return shall be made for the following product categories: Software

 

 

To look into your return or exchange, we require a receipt or proof of purchase. For returns, it is the customer’s responsibility to deliver the item back to Anfio.

 

 

For the customer’s convenience, Anfio may be able to provide an option for collection via courier at a nominal rate.

 

 

Once your return is received and inspected, we will send you an email or a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, Money will be sent to you via cash or a bank transfer, within a certain amount of days.

Selected products as “On request“ or “On Order“ items are not possible to be returned.

 

 

Shipping costs on returned products would be your responsibility. Shipping costs charged upon your purchase are non-refundable. Ensuring that it’s not our responsibility, if at all Namo Computers is necessitated for paying shipping charges upon any return product/shipment then such charges will be deducted from the subjected refund amount.

 

 

These terms & conditions shall be governed and constructed in accordance with the laws of the Zambia 

 

 

REFUNDS (IF APPLICABLE)

Once your return is received and inspected, we will send you an email or give you a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed Money will be given to you via cash or bank transfer, within a certain amount of days