Ubiquiti Networks airFiber 24 GHz Carrier Class Point-to-Point Gigabit Radio, 50W, RF status, GPS synchronization, 24.1 GHz, 24.2 GHz | AF-24

Description for Ubiquiti Networks airFiber 24 GHz Carrier Class Point-to-Point Gigabit Radio, 50W, RF status, GPS synchronization, 24.1 GHz, 24.2 GHz | AF-24



General Specifications

LEDs 8 x Status LEDs:
Data port speed
Data port link/activity
Configuration port speed
Configuration port link/activity
GPS synchronization
Modulation mode
Master/slave
RF status

1 x 2-digit LED display calibrated in dBm
Maximum Power Consumption 50 W
Power Supply 50 V, 1.2 A PoE Gigabit Ethernet adapter (included)
Power Method Passive Power over Ethernet (42 - 58 VDC)
Wind Loading 480 N at 200 km/hr (108 lbf at 125 mph)
Wind Survivability 200 km/hr (125 mph)
Mounting Pole mount kit (included)
Operating Frequency 24.05 - 24.25 GHz
Operating Temperature -40 to 131°F (-40 to +55°C)


Interface

Data Port 10/100/1000 Ethernet port
Configuration Port 10/100 Ethernet port
Auxiliary Port RJ-12, Alignment Tone port

System Specifications

Maximum Throughput 1.4+ Gb/s
Maximum Range 13+ km
Packets per Second >1 million
Encryption 128-bit AES
Forward Error Correction 164/205
Cyclic Prefix 1/16 fixed
Uplink/Downlink Ratio 50% fixed


Sensitivity Specifications

Receive Sensitivity Modulation: Sensitivity: FDD Capacity*: TDD Capacity*
64QAM: -66 dBm: 1500 Mb/s: 760 Mb/s
16QAM: -72 dBm: 1000 Mb/s: 507 Mb/s
QPSK MIMO: -78 dBm: 500 Mb/s: 253 Mb/s
QPSK SISO: -80 dBm: 250 Mb/s: 127 Mb/s
¼x QPSK SISO: -87 dBm: 62.5 Mb/s: 31.7 Mb/s

Radio Frequencies

GPS GPS clock synchronization

Transceiver Specification

EIRP ~33 dBm (FCC/IC), ~20 dBm (CE)
Frequency Accuracy ±2.5 ppm without GPS synchronization
±0.2 ppm with GPS synchronization
Channel Bandwidth 100 MHz
Operating Channels 24.1 GHz, 24.2 GHz
Modulation 64QAM MIMO
16QAM MIMO
QPSK MIMO
QPSK SISO
¼x QPSK SISO

Integrated Split Antenna

TX Gain 33 dBi
RX Gain 38 dBi
Beamwidth < 3.5°
Front-to-Back Ratio 70 dB
Polarity Dual-slant polarization
Cross Polar Isolation >28 dB

Standards and Certifications

Certifications CE, FCC, IC

Physical Characteristics

Dimensions 25.55 x 16.77 x 11.93" (64.90 x 42.60 x 30.30 cm)
Weight 23.15 lb (10.50 kg) mount included

We will endeavour to process and ship your orders within 2 to 3 days of receiving your order. If the order is within Lusaka it can take between 1-2 working days to receive the order from the date since it has been ordered.

Free shipping and delivery can be within Lusaka if the value is above ZMK 1000. For all orders below ZMK 1000, a minimal charge will be applied per order. Delivery to Out of Service Areas will incur extra charges as per the location from the shop. The recipient of an international shipment may be subjected to pay Customs Duties or fees as levied by the destination country. We have no control over these charges and are unable to calculate what they may be. International shipping times vary by carrier & destination (7-15 working days)

Exchange or Return is possible only if the product is not damaged or the packaging is not broken

No Exchange or Return shall be made without the Original Invoice provided and the product (including the unit carton) is returned unused and unopened (original seal not broken) along with accessories & FOC (Free of Cost) items, if applicable.

 

 

No Exchange or Return shall be made for the following product categories: Software

 

 

To look into your return or exchange, we require a receipt or proof of purchase. For returns, it is the customer’s responsibility to deliver the item back to Anfio.

 

 

For the customer’s convenience, Anfio may be able to provide an option for collection via courier at a nominal rate.

 

 

Once your return is received and inspected, we will send you an email or a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, Money will be sent to you via cash or a bank transfer, within a certain amount of days.

Selected products as “On request“ or “On Order“ items are not possible to be returned.

 

 

Shipping costs on returned products would be your responsibility. Shipping costs charged upon your purchase are non-refundable. Ensuring that it’s not our responsibility, if at all Namo Computers is necessitated for paying shipping charges upon any return product/shipment then such charges will be deducted from the subjected refund amount.

 

 

These terms & conditions shall be governed and constructed in accordance with the laws of the Zambia 

 

 

REFUNDS (IF APPLICABLE)

Once your return is received and inspected, we will send you an email or give you a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed Money will be given to you via cash or bank transfer, within a certain amount of days