Ubiquiti Networks Wave AP UISP Outdoor Wi-Fi 6 Access Point, 60GHz Band, Up to 5Gb/s Speed, GPS & Bluetooth, 15 Clients, 30° Coverage & Up to 8km Range, IPX6,2.5GbE / 0G SFP+ /White | Wave-AP

Wave AP 

Powered by Wave Technology.

The Wave Access Point can connect up to 15 stations and deliver up to 5.4 Gbps total throughput (2.7 Gbps duplex). It is equipped with a high-performance 5 GHz backup radio to ensure uninterrupted connection, as well as a Bluetooth radio to simplify setup in the UISP Mobile app.

 
 

Key Features

  • 60 GHz PtMP access point powered by Wave Technology.
  • 60 GHz 5.4 Gbps max. throughput (2.7 Gbps duplex) main radio
  • 30° sector coverage
  • 5 GHz 800+ Mbps weather-resilient backup radio
  • 5 GbE and (1) 10G SFP+ WAN ports
  • 15 client capacity:
    — Wave Pro (8 km link range)
    — Wave Long-Range (8 km link range)
    — Wave Nano (5 km link range)
  • Integrated GPS & Bluetooth

 

 

 

 

 

 

 

 

 

Specifications

 

Mechanical  
Dimensions 212 x 205 x 187 mm (8.3 x 8.1 x 7.4")
Weight 2.3 kg (5.07 lb)
Enclosure materials Aluminum alloy, UV stabilized polycarbonate
Pole mount diameter 25 to 76 mm (1 to 3") on pipe outer diameter
Wind loading 98 N at 200 km/h (22 lbf at 125 mph)
Weatherproofing IPX6
Hardware  
Processor Quad-core ARM® Cortex®-A53 at 1.4 GHz
Memory DDR3L 512 MB
Networking interface (1) 2.5GbE RJ45 port (100/1000/2500)*
Max. power consumption 24W
Power method Passive PoE 4-pairs, Passive PoE 2-pairs (for 44–54V DC only)
Power supply 48V DC, 0.65A 2.5GbE PoE adapter (included)
Supported voltage range 44–54V DC, 22–27V DC
GPS Yes
Button Factory reset
LEDs Power, Ethernet, GPS
Operating temperature -40 to 60° C (-40 to 140° F)
Operating humidity 5 to 95% non-condensing
Certifications FCC, IC, CE
Software  
Operating mode PtMP access point
Ubiquiti specific features Wave technology
Services UISP, ping watchdog, NTP client, SNMP
Tools Antenna alignment, discovery utility, ping, trace route, speed test
Network Bridge mode
Application requirements UISP: Version 1.5.7 and later
System  
Total throughput 5.4 Gbps (2.7 Gbps duplex)
Supported clients count 15
Max. range Connecting to a Wave Pro: up to 8 km
Encryption WPA2-PSK (AES)
RF  
Operating frequency 57–71 GHz (Depends on regulatory region)
Channel bandwidth 2160, 1080 MHz
Operating channels 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz (Depends on regulatory region)
Modulation 16QAM, QPSK
Antenna gain 24 dBi
Polarization Vertically linear
Beamwidth Azimuth: 3 dB 30°, Elevation: 3 dB 3°
Electrical downtilt
Back-Up RF  
WiFi standard 802.11ax (WiFi 6)
Operating frequency US/CA: 5150 - 5250 MHz, Worldwide: 5150 - 5875 MHz (Depends on regulatory region)
Channel bandwidth 20, 40, 80 MHz
Modulation BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM
Antenna gain 12 dBi
Cross-pol isolation 10 dB
Polarization Dual-linear
Beamwidth Azimuth: 3 dB 35°, Elevation: 3 dB 60°
Electric downtilt
LEDs  
Power Flashing white: bootup in progress, White: not connected to UISP application, Blue: connected to UISP application, Flashing blue: locate in progress, Blue/white: firmware upgrade in progress
Ethernet Flashing white: Ethernet traffic detected, Flashing blue: SFP+ traffic detected
GPS Blue: receiving at least (4) GPS satellite signal

We will endeavour to process and ship your orders within 2 to 3 days of receiving your order. If the order is within Lusaka it can take between 1-2 working days to receive the order from the date since it has been ordered.

Free shipping and delivery can be within Lusaka if the value is above ZMK 1000. For all orders below ZMK 1000, a minimal charge will be applied per order. Delivery to Out of Service Areas will incur extra charges as per the location from the shop. The recipient of an international shipment may be subjected to pay Customs Duties or fees as levied by the destination country. We have no control over these charges and are unable to calculate what they may be. International shipping times vary by carrier & destination (7-15 working days)

Exchange or Return is possible only if the product is not damaged or the packaging is not broken

No Exchange or Return shall be made without the Original Invoice provided and the product (including the unit carton) is returned unused and unopened (original seal not broken) along with accessories & FOC (Free of Cost) items, if applicable.

 

 

No Exchange or Return shall be made for the following product categories: Software

 

 

To look into your return or exchange, we require a receipt or proof of purchase. For returns, it is the customer’s responsibility to deliver the item back to Anfio.

 

 

For the customer’s convenience, Anfio may be able to provide an option for collection via courier at a nominal rate.

 

 

Once your return is received and inspected, we will send you an email or a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, Money will be sent to you via cash or a bank transfer, within a certain amount of days.

Selected products as “On request“ or “On Order“ items are not possible to be returned.

 

 

Shipping costs on returned products would be your responsibility. Shipping costs charged upon your purchase are non-refundable. Ensuring that it’s not our responsibility, if at all Namo Computers is necessitated for paying shipping charges upon any return product/shipment then such charges will be deducted from the subjected refund amount.

 

 

These terms & conditions shall be governed and constructed in accordance with the laws of the Zambia 

 

 

REFUNDS (IF APPLICABLE)

Once your return is received and inspected, we will send you an email or give you a call to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed Money will be given to you via cash or bank transfer, within a certain amount of days